HYDRAULIC CYLINDERS
Long Stroke Clevis Hydraulic Cylinder
Long-stroke hydraulic cylinder with a clevis rod end and eye base. Confirm bracket spacing, pin dimensions and operating travel from the drawing.
- Product type
- Hydraulic cylinder
- Mounting
- Clevis rod end with eye base end
- Configuration
- Customer requirement confirmed by drawing
01
Product overview
This hydraulic cylinder is shown in a partially extended position with an eye mount at the base end and a clevis (two parallel plates with aligned holes) at the rod end. The barrel, rod and both mounting ends carry a yellow painted finish, with a gland collar where the rod leaves the barrel and two small hydraulic ports. Contact us with your drawing and required stroke to confirm a suitable configuration.
Product overview
A long-stroke clevis hydraulic cylinder shown partially extended, with a clevis rod end, an eye base end and top-mounted hydraulic ports.
Request a quotation
Provide your drawing and required stroke to confirm the appropriate configuration.
02
Specifications
- Product type
- Hydraulic cylinder
- Mounting
- Clevis rod end with eye base end
- Configuration
- Customer requirement confirmed by drawing
03
Applications
- Industrial equipment
- Custom machinery
04
Selection notes
Check clevis plate spacing and base-eye width against the equipment brackets. Include the required extended and retracted positions and describe any side loading so rod alignment and support requirements can be reviewed.
